Main Article Content

Abstract

Vibrations are produced during any machining process. For drilling operation, analysis of these vibrations plays an important role in order to predict phenomenon of ‘chatter’. This paper emphasizes the analysis of vibration during drilling operation. The output results of analysis are useful to find out amplitude of vibrations produced with respect to drill size and spindle speed for standard rate of recommended feed/min. Analysis is quantified and tabulated as per available machining parameters of ‘THAKUR PELTER DRILLING MACHINE’ which is present in the Workshop of Fr. Conceiceo Rodrigues Institute of Technology, Vashi, Navi Mumbai. The optimum values of spindle speed and feed for maximium amplitude of transverse vibrations with respect to drill size are highlighted in the table and brought to the notice of Workshop Superintendent. The table of formulated results is displayed near this drilling machine.

Keywords

Chatter drilling operation.

Article Details

How to Cite
Wani, A. S., Sagavkar, G. S., & Bhate, V. K. (2015). VIBRATION ANALYSIS OF DRILLING OPERATION. Students’ Research in Technology & Management, 1(2), 163-175. Retrieved from https://giapjournals.com/ijsrtm/article/view/58

References

  1. Erik Oberg and Franklin D Jones, “Machinery’s Handbook”(28th Edition).
  2. F. B. Sayyad, “Mechanical Vibration”,Tech-max Publications.
  3. V. P. Singh,“Mechanical Vibration”,Dhanpat rai Publication.
  4. S. K. Hajra choudhury, A. K. Hajra choudhury and Nirjhar Roy, “Elements Of Workshop
  5. Technology Volume -2 Machine Tools”
  6. S. S. Rao, “Mechanical Vibrations ”,Pearson publication
  7. Mr. Muhammad Munawar, “Optimization of Surface Finish by Considering the Effect of
  8. Vibration in Machining Operations” [online].