Main Article Content
Nowadays, Autonomous carrier vehicles are becoming more predominant for the modern society. Hence designing these vehicles is one of the core fields of automation engineering. In regard to that, our project full-fills an idea of autonomous transportation. This vehicle is a carrier of materials from one place to another place through a fixed lane Path (guide way). It can also act as an easy vehicle for disabled and blind people in their houses.
The main carrier consists of a table mounted on four omni-wheeled base which has control unit which guides the direction of the wheels. The carrier has an insert which moves through a guide keyway. Each junction and turning points has proximity sensor which indicates the position of carrier to the controller. The microcontroller is programmed in such a way that it can find the direction that the bot has to move at every junctions. This was programmed by considering the shortest path between the current position and the destination point. The controlled signal is amplified and made to actuate the motor control relays.
Carrier bot is operated wirelessly using RF remote which has the position buttons. Those buttons are assigned as the positions. These are the positions that the sensors were built. When we call the bot to a point by pressing the corresponding button it can arrive to that point from any positions and it can autonomously find its way to there and can be sent to any position in a similar way. It can find its applications in a variety of area so as stated as multi-purpose carrier, ranging from hypermarkets to hospitals and libraries to warehouses. In hotels and restaurants it can be employed to serve the food as a servant.
Authors retain the copyright without restrictions for their published content in this journal. IJSRTM is a SHERPA ROMEO Journal.
- D. Nazzal, A. El-Nashar, Survey of research in modeling conveyor-based automated material handling systems in wafer fabs. Simulation Conference, 2007 Winter, 2007 - ieeexplore.ieee.org
- Mary Kathryn Thompson, Andrew G. Brooks, Department of Civil Engineering, KAIST, Daejeon, Considerations for the Design of Automated Urban Transportation Systems, The Twenty-Third KKCNN Symposium on Civil Engineering November 13–15, 2010, Taipei.
- P. J. Egbelu, The use of non-simulation approaches in estimating vehicle requirements in an automated guided vehicle based transport system, Material Flow, 1987 - bufaim.boun.edu.tr.
- R. Damoto, W. Cheng, S. Hirose, Holonomic omnidirectional vehicle with new omni-wheel mechanism, Robotics and Automation, 2001. Proceedings 2001 ICRA. IEEE International Conference on (Volume 1)